When you have an android smartphone, you have to charge it frequently to keep it functional. Because of the thin and fragile design of android charger cords, it is most likely that you have lost many of them over the years. And it’s something you’ve always attempted to address.
The habit of using the charger for extended periods of time increases your chances of breaking its cable, and no brand is immune to such problems. The wiring system of the charger requires a soft, flexible setup, which makes the cables weak. Luckily, there are some techniques you can follow to fix a broken android charger cord and get it working again. In like manner, we’ll show you some wonderful techniques to fix the cord and and prevent further damage from occurring.
Identifying The Problem
Sometimes, the broken part of the charger cord is not the key problem for the charging issues. So, you should examine the whole charger and other parts to ensure that everything except the broken part is working correctly. Besides, the broken cord may contain damaged wires, and only fixing the external part won’t be enough for the complete fix. For this reason, we recommend you follow the below steps before moving to the final fixing tasks.
Restart Your Android Device
Software issues are the primary concerns for any tech device. So, you should check if your android device has any software issues like not recognizing the charger or running corrupted battery functions. Usually, all of these problems become solved automatically after a reboot. To add more, you can troubleshoot the device’s software for further issues, but that’s not much necessary when the device works perfectly in other aspects.
Clean The Charging Port
Another common charging issue is created because of the dust on the charging port of the android smartphone. Actually, this part is the connection zone, which allows the cable to deliver power into the device. And, when it collects grime and dust, the port may not work properly. That means, the charging function won’t work as well.
If you see some dust inside the port, use compressed airflow to remove light or sand-type dust. In case the dust is not cleaned thoroughly, you can use a toothpick to remove the remaining dust. After that, the charger should work fine. If not, then the problem is not in your device or its port.
Check The Power Outlet
A power outlet is a part where you need to plug in the adapter of your charger. This outlet can also create charging issues in some cases. First, use a different outlet to charge your android phone. If you can charge by changing the outlet, the wires of your cable are working just fine. In contrast, when the issues remain in every outlet, you may need to repair your charger cord or buy a new one.
Check The Charger Cable
After checking all other parts, you should now move on to the charger cord. As the cord is already broken, there is not much left to examine it. Simply, you need to check if the internal wires are exposed or not. If not, then remove the cable from the adapter and try to clean the port. Sometimes, it can solve the charging problem of this charger.
When the inner wires are totally unexposed, and the charger still doesn’t work, you should repair it from a professional mechanic or buy a new charger. In other cases, you can try to fix the android charger cord.
How To Fix A Broken Android Charger Cord
When your charger works perfectly, despite having a broken cord, you can easily fix the broken part. Because, the inner wiring system is not damaged in that case. However, when the ripping wires of the cord are visual, you need to repair the wiring system first. Then, fix the outer part of the cord.
For Damaged Wiring
A broken android charger cord may contain ripped wires in it, and you cannot fix the cord totally without repairing the wiring first. For this, you can use the following method to reconnect the wires.
Using Soldering Iron
Not to mention, you cannot repair the faulty wire by simply joining the wires. Because, temporarily connecting them can bring back the charging issues again in the future. To avoid such problems, you can use a soldering iron to join the wires by following the below steps.
- First, gently cut the casing of the cord to expose the ripped wires so that you don’t damage other wires when joining them.
- Take out the heads of the damaged wires and separate them from others.
- If more than one wire is ripped apart, look for the wire sequence of your charger cable on the internet. Then, take note of the damaged wire sequences.
- Now, use the soldering iron after heating it. Join the broken wires using that iron.
- You can use a glue gun to insulate the wires if needed. Skip this part when others are already insulated.
- After joining the wires, you can now move on to the fixing part of the outer cord.
For Working Cables
If the cable is working without any kind of charging issues and your only concern is repairing the outer broken part of the charger cord, you can simply repair the cord using the following methods.
Using Electrical Tape
Usually, the electrical tape is made using plastic material and a suitable option as an insulating material. And, you can simply use it to fix your broken cord.
Simply, attach the electrical tape around the broken part of your cord. And, the layer of the tape should be at a standard level. Don’t make it too thick or too thin. However, this method only works as a temporary solution. Because, the glue of the tape starts to fade away after some days, making the broken part loose again.
Using A Glue gun
This method is another simple method that doesn’t require extra tools. If you have a glue gun, the fixing won’t take more than a minute.
To apply this method, hold the broken cord steadily in a straight position. Then, glue the outer broken part of the cord using the glue gun. As a result, the broken part of the cord will be covered with glue, and you should dry it to make the cord usable. After that, the cord will be flexible enough to work again.
Using Heat Shrink Tube
One of the popular methods of fixing a broken charger cord is using a heat shrink tube. Don’t forget that you need a heat gun to follow this method.
- First, you need to buy a heat shrink tube that comes with a 3:1 ratio. Though you can also choose 2:1 ration tubes, these may not serve very well for long-term use.
- Measure the broken part of the cord and cut the heat shrink tube according to the necessity. Remember that the tube must cover the whole broken part, including the plastic part of the cable head.
- Now, use pliers to hold the cord when heating the shrink tube using the heat gun. Rotate the tube to give necessary heat to all sides and allow shrinking perfectly.
- After heating it, secure the unfit parts to attach the tube entirely. Then, allow it to cool to complete the fixing process.
Conclusion
We’ve covered some simple solutions to fix your broken android charger cord. You should check the inner wires and fix them first if needed. Then, apply any of the methods mentioned above. These techniques work only when the wiring of your charger cord is not burnt or damaged heavily. Otherwise, we suggest you buy a new charger instead of trying to fix it.
Leave a Reply